Blog
Short articles for valve selection, pump replacement and MRO purchasing decisions.
A procurement manager answers common questions about Watts relief valves, pressure reducing valves, 120 gal air compressors, the 18V ONE+ 1/2" hammer drill P214, and whether a drill can replace an impact driver.
A facility buyer explains why wattage numbers don't replace real specs when you're choosing a Watts circulation pump, air tools, or even a door hinge.
A no-fluff checklist for replacing a Watts 3/4 pressure reducing valve: sizing, S-585-70 bronze ball valve selection, line flushing with a screw type air compressor, pressure testing, and the mistakes that cause callbacks.
A procurement manager's practical guide to well pump wattage, heat pump wattage, Watts sump pump 53-0001, slip ball valves, and choosing an air compressor for a nail gun.
"Watts" can mean the valve and pump brand or the unit of electrical power. This guide compares the brand vs. the unit, covers Watts washing machine valves, sump pump 50 series maintenance, and explains how many watts a 3-ton heat pump uses.
Watts recirculating pumps, Watts 174A relief valves, and 3/4 in. brass push check valves are often mixed up. Plus the answer to 'is a PCV valve a check valve?'—a practical field guide.
A Watts quality compliance manager explains why washing machine supply valves and sump pump float switches are the most common preventable water damage failure points, how to adjust a float switch, what wattage sump pumps actually draw, and which tools are worth owning for DIY plumbing.